AT Power Direct-to-Head port matched 45mm Throttle Bodies suitable for the EW10J4s engine found in the Peugeot 206 GTI 180 & RC. These throttle bodies are a single-unit direct-to-head throttle body conversion, however original power steering pump must be removed. These throttle bodies feature oval, 'shaftless', and knife-edged butterflies for improved airflow & performance. Pictured with TPS but not included. Please select at the checkout if you would like to add one to your order.
Delivered fully assembled with a Billet Aluminium Fuel Rail, choice of linkage options, and inlet lengths and calibrated for your choice of TPS. The OEM injectors (larger injectors recommended on applications over 180bhp) and Throttle Position Sensor (TPS) is Compatible with this kit.
Please note that engine management is required and you will either need to convert to a throttle cable or if you wish to keep motorised throttle, this is possible by adding AT Powers electronic throttle actuator. The electronic actuator consists of a DC motor and reduction gearing to provide the maximum torque and operational speed. The actuator has an angular sweep of 110 degrees and can be operated in both directions with a central mounting position with a linkage arm connection, this has been designed to give 360 degrees of radial positioning for fine-tuning. AT power use a dual fully redundant contactless Throttle Position Sensor (TPS) which can be programmed and wired to suit the individual application. The TPS can be mounted on either side of the actuator with the linkage assembly being mounted on the opposite side.
We also recommend running an air filter with these throttle bodies which you can add at the checkout.
The estimated delivery time is within 5 - 15 working days depending on the stock of your required colour.