205 Satchell Narrow Track Front Suspension Kit

A fully spherical jointed front suspension kit to fit the 205, with revised roll-centre and bump steer correction. This kit has a strengthened and refurbished subframe along with re-positioned rear compression strut clevises to aid strength. The wishbones are fabricated from CDS tube and are designed with race and rally in mind.

We use refurbished 307 hubs along with new bearings, so does require our 40mm inverted type strut bodies to suit the 307 two bolt hub. This allows us to run a narrower track and has the advantage of allowing camber adjustment on the strut body.

Supplied with screw on rose jointed track rod ends .

The caster and camber is adjustable.

Please Note:

• The front subframe is supplied on an exchange basis or a surcharge will apply.
• There is no provision to run the front ARB with this setup.

The estimated lead time is 4-6 weeks.